initial commit

config/application.rb

@@ -0,0 +1,23 @@
+# frozen_string_literal: true
+
+require_relative 'boot'
+
+require 'active_record/railtie'
+require 'active_storage/engine'
+require 'action_controller/railtie'
+require 'action_view/railtie'
+require 'action_mailer/railtie'
+require 'active_job/railtie'
+
+Bundler.require(*Rails.groups)
+
+module Docuseal
+  class Application < Rails::Application
+    config.load_defaults 7.0
+
+    config.autoload_paths << Rails.root.join('lib')
+    config.eager_load_paths << Rails.root.join('lib')
+
+    config.active_storage.routes_prefix = ''
+  end
+end

config/boot.rb

@@ -0,0 +1,6 @@
+# frozen_string_literal: true
+
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../Gemfile', __dir__)
+
+require 'bundler/setup' # Set up gems listed in the Gemfile.
+require 'bootsnap/setup' # Speed up boot time by caching expensive operations.

config/database.yml

@@ -0,0 +1,15 @@
+default: &default
+  adapter: postgresql
+  encoding: unicode
+
+development:
+  <<: *default
+  database: docuseal_dev
+
+test:
+  <<: *default
+  database: docuseal_test
+
+production:
+  <<: *default
+  database: db/production.sqlite3

config/environment.rb

@@ -0,0 +1,7 @@
+# frozen_string_literal: true
+
+# Load the Rails application.
+require_relative 'application'
+
+# Initialize the Rails application.
+Rails.application.initialize!

config/environments/development.rb

@@ -0,0 +1,90 @@
+# frozen_string_literal: true
+
+require 'active_support/core_ext/integer/time'
+
+Rails.application.configure do
+  config.after_initialize do
+    Bullet.enable        = true
+    Bullet.alert         = false
+    Bullet.bullet_logger = true
+    Bullet.console       = true
+    Bullet.rails_logger  = true
+    Bullet.add_footer    = true
+  end
+
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded any time
+  # it changes. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports.
+  config.consider_all_requests_local = true
+
+  # Enable server timing
+  config.server_timing = true
+
+  # Enable/disable caching. By default caching is disabled.
+  # Run rails dev:cache to toggle caching.
+  if Rails.root.join('tmp/caching-dev.txt').exist?
+    config.action_controller.perform_caching = true
+    config.action_controller.enable_fragment_cache_logging = true
+
+    config.cache_store = :memory_store
+    config.public_file_server.headers = {
+      'Cache-Control' => "public, max-age=#{2.days.to_i}"
+    }
+  else
+    config.action_controller.perform_caching = false
+
+    config.cache_store = :null_store
+  end
+
+  # Store uploaded files on the local file system (see config/storage.yml for options).
+  config.active_storage.service = :disk
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = true
+  config.action_mailer.perform_deliveries = true
+  config.action_mailer.delivery_method = :letter_opener_web
+
+  config.action_mailer.perform_caching = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise exceptions for disallowed deprecations.
+  config.active_support.disallowed_deprecation = :raise
+
+  # Tell Active Support which deprecation messages to disallow.
+  config.active_support.disallowed_deprecation_warnings = []
+
+  # Raise an error on page load if there are pending migrations.
+  # config.active_record.migration_error = :page_load
+
+  # Highlight code that triggered database queries in logs.
+  config.active_record.verbose_query_logs = true
+
+  config.active_record.encryption = {
+    primary_key: 'dev master key',
+    deterministic_key: 'dev deterministic key',
+    key_derivation_salt: 'dev key derivation salt'
+  }
+
+  config.action_mailer.default_url_options = { host: 'localhost', port: ENV.fetch('PORT', 3000).to_i }
+  config.action_controller.default_url_options = config.action_mailer.default_url_options
+  routes.default_url_options = config.action_mailer.default_url_options
+
+  # Raises error for missing translations.
+  # config.i18n.raise_on_missing_translations = true
+
+  # Annotate rendered view with file names.
+  # config.action_view.annotate_rendered_view_with_filenames = true
+
+  # Uncomment if you wish to allow Action Cable access from any origin.
+  # config.action_cable.disable_request_forgery_protection = true
+end

config/environments/production.rb

@@ -0,0 +1,90 @@
+# frozen_string_literal: true
+
+require 'active_support/core_ext/integer/time'
+require 'active_support/core_ext/string'
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Ensures that a master key has been made available in either ENV["RAILS_MASTER_KEY"]
+  # or in config/master.key. This key is used to decrypt credentials (and other encrypted files).
+  # config.require_master_key = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.public_file_server.enabled = true
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for Apache
+  # config.action_dispatch.x_sendfile_header = "X-Accel-Redirect" # for NGINX
+
+  # Store uploaded files on the local file system (see config/storage.yml for options).
+  config.active_storage.service = :local
+
+  # Mount Action Cable outside main process or domain.
+  # config.action_cable.mount_path = nil
+  # config.action_cable.url = "wss://example.com/cable"
+  # config.action_cable.allowed_request_origins = [ "http://example.com", /http:\/\/example.*/ ]
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Include generic and useful information about system operation, but avoid logging too much
+  # information to avoid inadvertent exposure of personally identifiable information (PII).
+  config.log_level = :info
+
+  # Prepend all log lines with the following tags.
+  config.log_tags = [:request_id]
+
+  config.cache_store = :memory_store
+
+  config.action_mailer.perform_caching = false
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Don't log any deprecations.
+  config.active_support.report_deprecations = false
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = Logger::Formatter.new
+
+  # Use a different logger for distributed setups.
+  # require "syslog/logger"
+  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new "app-name")
+
+  logger           = ActiveSupport::Logger.new($stdout)
+  logger.formatter = config.log_formatter
+  config.logger    = ActiveSupport::TaggedLogging.new(logger)
+
+  config.active_record.encryption = {
+    primary_key: ENV['SECRET_KEY_BASE'].first(32),
+    deterministic_key: ENV['SECRET_KEY_BASE'].last(32),
+    key_derivation_salt: ENV.fetch('SECRET_KEY_BASE', nil)
+  }
+
+  config.action_mailer.default_url_options = { host: ENV.fetch('HOST', nil), port: ENV.fetch('PORT', nil) }
+  config.action_controller.default_url_options = config.action_mailer.default_url_options
+  routes.default_url_options = config.action_mailer.default_url_options
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end

config/environments/test.rb

@@ -0,0 +1,62 @@
+# frozen_string_literal: true
+
+require 'active_support/core_ext/integer/time'
+
+# The test environment is used exclusively to run your application's
+# test suite. You never need to work with it otherwise. Remember that
+# your test database is "scratch space" for the test suite and is wiped
+# and recreated between test runs. Don't rely on the data there!
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Turn false under Spring and add config.action_view.cache_template_loading = true.
+  config.cache_classes = true
+
+  # Eager loading loads your whole application. When running a single test locally,
+  # this probably isn't necessary. It's a good idea to do in a continuous integration
+  # system, or in some way before deploying your code.
+  config.eager_load = ENV['CI'].present?
+
+  # Configure public file server for tests with Cache-Control for performance.
+  config.public_file_server.enabled = true
+  config.public_file_server.headers = {
+    'Cache-Control' => "public, max-age=#{1.hour.to_i}"
+  }
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+  config.cache_store = :null_store
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Store uploaded files on the local file system in a temporary directory.
+  config.active_storage.service = :test
+
+  config.action_mailer.perform_caching = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raise exceptions for disallowed deprecations.
+  config.active_support.disallowed_deprecation = :raise
+
+  # Tell Active Support which deprecation messages to disallow.
+  config.active_support.disallowed_deprecation_warnings = []
+
+  # Raises error for missing translations.
+  # config.i18n.raise_on_missing_translations = true
+
+  # Annotate rendered view with file names.
+  # config.action_view.annotate_rendered_view_with_filenames = true
+end

config/initializers/active_storage.rb

@@ -0,0 +1,17 @@
+# frozen_string_literal: true
+
+ActiveSupport.on_load(:active_storage_attachment) do
+  attribute :uuid, :string, default: -> { SecureRandom.uuid }
+
+  has_many_attached :preview_images
+end
+
+Rails.configuration.to_prepare do
+  ActiveStorage::DiskController.after_action do
+    response.set_header('Cache-Control', 'public, max-age=31536000') if action_name == 'show'
+  end
+
+  LoadActiveStorageConfigs.call
+rescue StandardError
+  nil
+end

config/initializers/better_html.rb

@@ -0,0 +1,9 @@
+# frozen_string_literal: true
+
+ActionView::Helpers.include(BetterHtml::Helpers)
+
+if defined?(BetterHtml)
+  BetterHtml.configure do |config|
+    config.template_exclusion_filter = ->(filename) { filename.include?('/gems/') }
+  end
+end

config/initializers/devise.rb

@@ -0,0 +1,308 @@
+# frozen_string_literal: true
+
+# Assuming you have not yet modified this file, each configuration option below
+# is set to its default value. Note that some are commented out while others
+# are not: uncommented lines are intended to protect your configuration from
+# breaking changes in upgrades (i.e., in the event that future versions of
+# Devise change the default values for those options).
+#
+# Use this hook to configure devise mailer, warden hooks and so forth.
+# Many of these configuration options can be set straight in your model.
+Devise.setup do |config|
+  # The secret key used by Devise. Devise uses this key to generate
+  # random tokens. Changing this key will render invalid all existing
+  # confirmation, reset password and unlock tokens in the database.
+  # Devise will use the `secret_key_base` as its `secret_key`
+  # by default. You can change it below and use your own secret key.
+
+  # ==> Controller configuration
+  # Configure the parent class to the devise controllers.
+  # config.parent_controller = 'DeviseController'
+
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in Devise::Mailer,
+  # note that it will be overwritten if you use your own mailer class
+  # with default "from" parameter.
+  # Configure the class responsible to send e-mails.
+  # config.mailer = 'Devise::Mailer'
+
+  # Configure the parent class responsible to send e-mails.
+  config.parent_mailer = 'ApplicationMailer'
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/active_record'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  # config.authentication_keys = [:email]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [:email]
+
+  # Configure which authentication keys should have whitespace stripped.
+  # These keys will have whitespace before and after removed upon creating or
+  # modifying a user and when used to authenticate or find a user. Default is :email.
+  config.strip_whitespace_keys = [:email]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # It can be set to an array that will enable params authentication only for the
+  # given strategies, for example, `config.params_authenticatable = [:database]` will
+  # enable it only for database (email + password) authentication.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Auth is enabled. False by default.
+  # It can be set to an array that will enable http authentication only for the
+  # given strategies, for example, `config.http_authenticatable = [:database]` will
+  # enable it only for database authentication.
+  # For API-only applications to support authentication "out-of-the-box", you will likely want to
+  # enable this with :database unless you are using a custom strategy.
+  # The supported strategies are:
+  # :database      = Support basic authentication with authentication key + password
+  # config.http_authenticatable = false
+
+  # If 401 status code should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. 'Application' by default.
+  # config.http_authentication_realm = 'Application'
+
+  # It will change confirmation, password recovery and other workflows
+  # to behave the same regardless if the e-mail provided was right or wrong.
+  # Does not affect registerable.
+  # config.paranoid = true
+
+  # By default Devise will store the user in session. You can skip storage for
+  # particular strategies by setting this option.
+  # Notice that if you are skipping storage for all authentication paths, you
+  # may want to disable generating routes to Devise's sessions controller by
+  # passing skip: :sessions to `devise_for` in your config/routes.rb
+  config.skip_session_storage = [:http_auth]
+
+  # By default, Devise cleans up the CSRF token on authentication to
+  # avoid CSRF token fixation attacks. This means that, when using AJAX
+  # requests for sign in and sign up, you need to get a new CSRF token
+  # from the server. You can disable this option at your own risk.
+  # config.clean_up_csrf_token_on_authentication = true
+
+  # When false, Devise will not attempt to reload routes on eager load.
+  # This can reduce the time taken to boot the app but if your application
+  # requires the Devise mappings to be loaded during boot time the application
+  # won't boot properly.
+  # config.reload_routes = true
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 12. If
+  # using other algorithms, it sets how many times you want the password to be hashed.
+  # The number of stretches used for generating the hashed password are stored
+  # with the hashed password. This allows you to change the stretches without
+  # invalidating existing passwords.
+  #
+  # Limiting the stretches to just one in testing will increase the performance of
+  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
+  # a value less than 10 in other environments. Note that, for bcrypt (the default
+  # algorithm), the cost increases exponentially with the number of stretches (e.g.
+  # a value of 20 is already extremely slow: approx. 60 seconds for 1 calculation).
+  config.stretches = Rails.env.test? ? 1 : 12
+
+  # Set up a pepper to generate the hashed password.
+  # Send a notification to the original email when the user's email is changed.
+  # config.send_email_changed_notification = false
+
+  # Send a notification email when the user's password is changed.
+  # config.send_password_change_notification = false
+
+  # ==> Configuration for :confirmable
+  # A period that the user is allowed to access the website even without
+  # confirming their account. For instance, if set to 2.days, the user will be
+  # able to access the website for two days without confirming their account,
+  # access will be blocked just in the third day.
+  # You can also set it to nil, which will allow the user to access the website
+  # without confirming their account.
+  # Default is 0.days, meaning the user cannot access the website without
+  # confirming their account.
+  # config.allow_unconfirmed_access_for = 2.days
+
+  # A period that the user is allowed to confirm their account before their
+  # token becomes invalid. For example, if set to 3.days, the user can confirm
+  # their account within 3 days after the mail was sent, but on the fourth day
+  # their account can't be confirmed with the token any more.
+  # Default is nil, meaning there is no restriction on how long a user can take
+  # before confirming their account.
+  # config.confirm_within = 3.days
+
+  # If true, requires any email changes to be confirmed (exactly the same way as
+  # initial account confirmation) to be applied. Requires additional unconfirmed_email
+  # db field (see migrations). Until confirmed, new email is stored in
+  # unconfirmed_email column, and copied to email column on successful confirmation.
+  config.reconfirmable = true
+
+  # Defines which key will be used when confirming an account
+  # config.confirmation_keys = [:email]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # Invalidates all the remember me tokens when the user signs out.
+  config.expire_all_remember_me_on_sign_out = true
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # secure: true in order to force SSL only cookies.
+  # config.rememberable_options = {}
+
+  # ==> Configuration for :validatable
+  # Range for password length.
+  config.password_length = 6..128
+
+  # Email regex used to validate email formats. It simply asserts that
+  # one (and only one) @ exists in the given string. This is mainly
+  # to give user feedback and not to assert the e-mail validity.
+  config.email_regexp = /\A[^@\s]+@[^@\s]+\z/
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  # config.unlock_keys = [:email]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # Warn on the last attempt before the account is locked.
+  # config.last_attempt_warning = true
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  # config.reset_password_keys = [:email]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  config.reset_password_within = 6.hours
+
+  # When set to false, does not sign a user in automatically after their password is
+  # reset. Defaults to true, so a user is signed in automatically after a reset.
+  config.sign_in_after_reset_password = true
+
+  # ==> Configuration for :encryptable
+  # Allow you to use another hashing or encryption algorithm besides bcrypt (default).
+  # You can use :sha1, :sha512 or algorithms from others authentication tools as
+  # :clearance_sha1, :authlogic_sha512 (then you should set stretches above to 20
+  # for default behavior) and :restful_authentication_sha1 (then you should set
+  # stretches to 10, and copy REST_AUTH_SITE_KEY to pepper).
+  #
+  # Require the `devise-encryptable` gem when using anything other than bcrypt
+  # config.encryptor = :sha512
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = false
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes (usually :user).
+  # config.default_scope = :user
+
+  # Set this configuration to false if you want /users/sign_out to sign out
+  # only the current scope. By default, Devise signs out all scopes.
+  # config.sign_out_all_scopes = true
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  #
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists.
+  #
+  # The "*/*" below is required to match Internet Explorer requests.
+  # config.navigational_formats = ['*/*', :html, :turbo_stream]
+
+  # The default HTTP method used to sign out a resource. Default is :delete.
+  config.sign_out_via = :delete
+
+  # ==> OmniAuth
+  # Add a new OmniAuth provider. Check the wiki for more information on setting
+  # up on your models and hooks.
+  # config.omniauth :github, 'APP_ID', 'APP_SECRET', scope: 'user,public_repo'
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not supported by Devise, or
+  # change the failure app, you can configure them inside the config.warden block.
+  #
+  # config.warden do |manager|
+  #   manager.intercept_401 = false
+  #   manager.default_strategies(scope: :user).unshift :some_external_strategy
+  # end
+
+  # ==> Mountable engine configurations
+  # When using Devise inside an engine, let's call it `MyEngine`, and this engine
+  # is mountable, there are some extra configurations to be taken into account.
+  # The following options are available, assuming the engine is mounted as:
+  #
+  #     mount MyEngine, at: '/my_engine'
+  #
+  # The router that invoked `devise_for`, in the example above, would be:
+  # config.router_name = :my_engine
+  #
+  # When using OmniAuth, Devise cannot automatically set OmniAuth path,
+  # so you need to do it manually. For the users scope, it would be:
+  # config.omniauth_path_prefix = '/my_engine/users/auth'
+
+  # ==> Hotwire/Turbo configuration
+  # When using Devise with Hotwire/Turbo, the http status for error responses
+  # and some redirects must match the following. The default in Devise for existing
+  # apps is `200 OK` and `302 Found respectively`, but new apps are generated with
+  # these new defaults that match Hotwire/Turbo behavior.
+  # Note: These might become the new default in future versions of Devise.
+  config.responder.error_status = :unprocessable_entity
+  config.responder.redirect_status = :see_other
+
+  # ==> Configuration for :registerable
+
+  # When set to false, does not sign a user in automatically after their password is
+  # changed. Defaults to true, so a user is signed in automatically after changing a password.
+  # config.sign_in_after_change_password = true
+end

config/initializers/field_error_proc.rb

@@ -0,0 +1,15 @@
+# frozen_string_literal: true
+
+ActionView::Base.field_error_proc = proc do |html_tag, instance|
+  next html_tag if html_tag.starts_with?('<label')
+
+  errors = Array(instance.error_message).join(', ')
+
+  field_name =
+    instance.object.class.human_attribute_name(instance.instance_variable_get(:@method_name).to_s)
+
+  result = html_tag
+  result += ApplicationController.helpers.tag.div("#{field_name} #{errors}") if errors.present?
+
+  result
+end

config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,3 @@
+# frozen_string_literal: true
+
+Rails.application.config.filter_parameters += %i[password token]

config/initializers/oj.rb

@@ -0,0 +1,3 @@
+# frozen_string_literal: true
+
+Oj.optimize_rails

config/locales/en.yml

@@ -0,0 +1,2 @@
+en:
+  hello: "Hello world"

config/puma.rb

@@ -0,0 +1,45 @@
+# frozen_string_literal: true
+
+# Puma can serve each request in a thread from an internal thread pool.
+# The `threads` method setting takes two numbers: a minimum and maximum.
+# Any libraries that use thread pools should be configured to match
+# the maximum value specified for Puma. Default is set to 5 threads for minimum
+# and maximum; this matches the default thread size of Active Record.
+#
+max_threads_count = ENV.fetch('RAILS_MAX_THREADS', 10)
+min_threads_count = ENV.fetch('RAILS_MIN_THREADS') { max_threads_count }
+threads min_threads_count, max_threads_count
+
+# Specifies the `worker_timeout` threshold that Puma will use to wait before
+# terminating a worker in development environments.
+#
+worker_timeout 3600 if ENV.fetch('RAILS_ENV', 'development') == 'development'
+
+# Specifies the `port` that Puma will listen on to receive requests; default is 3000.
+#
+port ENV.fetch('PORT', 3000)
+
+# Specifies the `environment` that Puma will run in.
+#
+environment ENV.fetch('RAILS_ENV', 'development')
+
+# Specifies the `pidfile` that Puma will use.
+pidfile ENV.fetch('PIDFILE', 'tmp/pids/server.pid')
+
+# Specifies the number of `workers` to boot in clustered mode.
+# Workers are forked web server processes. If using threads and workers together
+# the concurrency of the application would be max `threads` * `workers`.
+# Workers do not work on JRuby or Windows (both of which do not support
+# processes).
+#
+workers ENV.fetch('WEB_CONCURRENCY', 0)
+
+# Use the `preload_app!` method when specifying a `workers` number.
+# This directive tells Puma to first boot the application and load code
+# before forking the application. This takes advantage of Copy On Write
+# process behavior so workers use less memory.
+#
+# preload_app!
+
+# Allow puma to be restarted by `bin/rails restart` command.
+plugin :tmp_restart

config/routes.rb

@@ -0,0 +1,58 @@
+# frozen_string_literal: true
+
+Rails.application.routes.draw do
+  mount LetterOpenerWeb::Engine, at: '/letter_opener' if Rails.env.development?
+
+  root 'dashboard#index'
+
+  devise_for :users, path: '/', only: %i[sessions passwords]
+
+  devise_scope :user do
+    if User.devise_modules.include?(:registerable)
+      resource :registration, only: %i[create], path: 'sign_up' do
+        get '' => :new, as: :new
+      end
+    end
+
+    resource :invitation, only: %i[update] do
+      get '' => :edit
+    end
+  end
+
+  namespace :api do
+    resources :attachments, only: %i[create]
+    resources :flows, only: %i[update] do
+      resources :documents, only: %i[create destroy], controller: 'flows_documents'
+    end
+  end
+
+  resources :dashboard, only: %i[index]
+  resources :setup, only: %i[index create]
+  resources :users, only: %i[new create edit update destroy]
+  resources :submissions, only: %i[show destroy]
+  resources :flows, only: %i[new create show destroy] do
+    resources :submissions, only: %i[index new create]
+  end
+
+  resources :start_flow, only: %i[show update], path: 'f', param: 'slug' do
+    get :completed
+  end
+
+  resources :submit_flow, only: %i[show update], path: 'l', param: 'slug' do
+    get :completed
+  end
+
+  resources :send_submission_email, only: %i[create] do
+    get :success, on: :collection
+  end
+
+  resources :submissions, only: %i[], param: 'slug' do
+    resources :download, only: %i[index], controller: 'submissions_download'
+  end
+
+  scope '/settings', as: :settings do
+    resources :storage, only: %i[index create], controller: 'storage_settings'
+    resources :email, only: %i[index create], controller: 'email_settings'
+    resources :users, only: %i[index]
+  end
+end

config/secrets.yml

@@ -0,0 +1,8 @@
+development:
+  secret_key_base: 5e626815c7ef00cc5d7b46ff3099160f25e5271b00ced3b8eba1d5045eb0db0ddb925c85b2fea6b2acb4cbdcb779ba9c5a31600f31e6ee8944ada47a768f6a7f
+
+test:
+  secret_key_base: 7d754998067691dc61859c6c3109966c44e1756a46fd2409f1d81403599605c103ff84b12102673b498bdbaba04d9949d8d7a2f7af47529ee6dc4dd19f0aef3e
+
+production:
+  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

config/storage.yml

@@ -0,0 +1,34 @@
+local:
+  service: Disk
+  root: <%= ENV['WORKDIR'] %>docuseal-attachments
+  public: true
+
+disk:
+  service: Disk
+  root: <%= ENV['WORKDIR'] %>docuseal-attachments
+  public: true
+
+aws_s3:
+  service: S3
+  access_key_id: <%= ENV['AWS_ACCESS_KEY_ID'] %>
+  secret_access_key: <%= ENV['AWS_SECRET_ACCESS_KEY'] %>
+  region: <%= ENV['AWS_REGION'] || 'us-east-1' %>
+  bucket: <%= ENV['S3_ATTACHMENTS_BUCKET'] %>
+  public: true
+  upload:
+    cache_control: 'public, max-age=31536000'
+
+google:
+  service: GCS
+  credentials: <%= JSON.parse(ENV['GCS_CREDENTIALS'] || '{}') %>
+  project: <%= ENV['GCS_PROJECT'] %>
+  bucket: <%= ENV['GCS_BUCKET'] %>
+  public: true
+  cache_control: "public, max-age=31536000"
+
+azure:
+  service: AzureStorage
+  storage_account_name: <%= ENV['AZURE_STORAGE_ACCOUNT_NAME'] %>
+  storage_access_key: <%= ENV['AZURE_STORAGE_ACCESS_KEY'] %>
+  container: <%= ENV['AZURE_CONTAINER'] %>
+  public: true

config/webpack/webpack.config.js

@@ -0,0 +1,39 @@
+const { webpackConfig, merge } = require('shakapacker')
+const BundleAnalyzerPlugin = require('webpack-bundle-analyzer').BundleAnalyzerPlugin
+const { VueLoaderPlugin } = require('vue-loader')
+
+const configs = merge(webpackConfig, {
+  resolve: {
+    extensions: ['.css', '.scss', '.vue']
+  },
+  optimization: {
+    runtimeChunk: false,
+    splitChunks: {
+      cacheGroups: {
+        default: false
+      }
+    }
+  },
+  plugins: [
+    process.env.BUNDLE_ANALYZE && new BundleAnalyzerPlugin(),
+    new VueLoaderPlugin()
+  ].filter(Boolean)
+})
+
+configs.module = merge({
+  rules: [
+    {
+      test: /\.vue$/,
+      use: [{
+        loader: 'vue-loader',
+        options: {
+          compilerOptions: {
+            isCustomElement: tag => tag.includes('-')
+          }
+        }
+      }]
+    }
+  ]
+}, configs.module)
+
+module.exports = configs

config/webpacker.yml

@@ -0,0 +1,47 @@
+default: &default
+  source_path: app/javascript
+  source_entry_path: /
+  nested_entries: false
+  public_root_path: public
+  public_output_path: packs
+  cache_path: tmp/webpacker
+  webpacker_precompile: true
+  webpack_compile_output: true
+  additional_paths: []
+  webpack_loader: 'babel'
+  compiler_strategy: digest
+  cache_manifest: false
+  ensure_consistent_versioning: false
+
+development:
+  <<: *default
+  compile: true
+  compiler_strategy: mtime
+
+  dev_server:
+    https: false
+    host: localhost
+    port: 3035
+    hmr: false
+    inline_css: true
+    live_reload: false
+    client:
+      overlay: false
+    compress: true
+    allowed_hosts: "all"
+    pretty: true
+    headers:
+      'Access-Control-Allow-Origin': '*'
+    static:
+      watch:
+        ignored: '**/node_modules/**'
+
+test:
+  <<: *default
+  compile: true
+  public_output_path: packs-test
+
+production:
+  <<: *default
+  compile: false
+  cache_manifest: true